Table of Contents   MOBOTIX Online Help

The OnScreen Control

The OnScreen Control (OSC) provides for comfortable configuration of the Panorama, Double Panorama and Panorama/Focus display modes. This control allows panning, tilting and zooming the camera's image to find the optimum image section for your purposes. Moreover, the trapezoid correction allows adjusting the skewed (vertical) lines on the image that are common for this type of lens.

Notes:

Overview

If you are selecting a display mode, which contains a Panorama window, you can activate the OnScreen Control:

If the OnScreen Control is visible, you can use it to adjust the visible image section to your needs.


Control Surfaces – Overview

Display OnScreen Control Shows the OnScreen Control and activates the PTZ actions.
OnScreen Control This is the complete OnScreen Control for wall mounting.
When attaching the camera to a ceiling or to the floor, the lower part for horizontal correction is not required.
Close Hides the OnScreen Control and locks the PTZ actions for this window.
Reset view Resets the current view to its default values (viewing direction is image center).
Set trapezoid correction Trapezoid correction: Allows adjusting the perspective of the image.
Zoom Control Changes the zoom setting.
Pan/Tilt Pans or tilts the visible image section in the corresponding direction.
Horizontal correction Horizontal correction: Allows correcting a tilted image if the camera has been mounted lopsidedly to a wall.

de, en

© 2001-2017 MOBOTIX AG, Germany · http://www.mobotix.com/